适用范围

1. 塑料磨粉磨废PE PP PVC粉磨机回收机用于硬质PVC回收领域,如次品和剩下的零碎东西，PVC管,PVC包装和剩下的零碎东西，铝塑料平板电脑,和铣削ABS, PS, PA, PC和其他塑料。

1. Plastic Pulverizing Milling Waste PE PP PVC Pulverizer Recycling Machine used in the field of hard PVC recycling, such as defective goods and leftover bits and pieces of PVC pipes, section bars and plates, PVC packaging and leftover bits and pieces of aluminum plastic tablets, and milling of ABS, PS, PA, PC and other plastics.

2. PE磨机的磨石最小直径为350mm，最大直径为800mm, PE磨机属于磨石式磨机系列。广泛应用于中等硬度的耐冲击易碎材料，如PE、PVC等

2. The minimum and maximum diameters of the millstone of the PE mill are 350mm and 800mm respectively, and the PE mill belongs to the series of millstone-type mills. It is widely used in impact-resistant and fragile materials with moderate hardness, such as PE, PVC, PP, ABS, PA, EVA, PET, PS, PPS, EPS, PC, foam and cow leather.

产品特点

1. 新型的刀具结构，在旋转叶片高速离心力的作用下，物料之间强烈的碰撞和静止叶片板的剪切破碎。

1. The new cutter structure, strong collision between materials and shear crushing of the stationary blade plate in terms of the high-speed centrifugal force of the rotating blade.

2. 风冷水冷组合的使用，有效的控制了破碎物料的温度，解决了热敏性塑料磨后变性、熔融、烧焦等问题。

2. The use of air-cooled and water-cooled combination has effectively controlled the temperature for crushing materials and solved the problem of degeneration, melting and charring of heat-sensitive plastics after grinding and other problems.

3.机器的研磨室可以打开，方便刀具的修理和更换。

3. The grinding chamber of the machine can be opened, so that the cutter can be easily repaired and replaced.

4. 配备振动筛分设备，使粉末颗粒不能满足要求的物料返回磨机进行再磨。

4. It is equipped with the vibration screening equipment, so that materials whose powder particles cannot meet the requirements shall be returned to the mill for re-milling.

5. 配备负压送料除尘装置，在提高物料排料速度的同时，避免了以往因正压排料而导致风机叶轮磨损的发生，磨粉过程中的粉尘也得到了有效的回收。

5. It is equipped with negative pressure feeding and dust removal devices, while improving the discharge speed of materials, avoid the occurrence of worn fan impellers due to the previous positive pressure discharge in the past, and dust in the process of milling has also been effectively recovered.

6. 电气控制部分采用国内知名品牌，主机部分采用星三角启动方式，降低启动电流，提高电机使用寿命。

6. The electrical control part uses the domestic well-known brand, and the host part uses the star-delta starting mode, reducing the start-up current and increasing the service life of the motor.